Module Sound.SoundOutput
Sound - Sound output classes.
Features:
- Create a SOUNDFILE object (mp3 or ogg) to be played via DCS or SRS transmissions
- Create a SOUNDTEXT object for text-to-speech output vis SRS Simple-Text-To-Speech (STTS)
Author: funkyfranky
There are two classes, SOUNDFILE and SOUNDTEXT, defined in this section that deal with playing sound files or arbitrary text (via SRS Simple-Text-To-Speech), respectively.
The SOUNDFILE and SOUNDTEXT objects can be defined and used in other MOOSE classes.
Global(s)
Global SOUNDBASE |
Basic sound output inherited by other classes suche as SOUNDFILE and SOUNDTEXT. |
Basic sound output inherited by other classes suche as SOUNDFILE and SOUNDTEXT.
This class is not meant to be used by "ordinary" users.
Global SOUNDFILE |
Sound files used by other classes. |
Sound files used by other classes.
The SOUNDFILE Concept
A SOUNDFILE object hold the important properties that are necessary to play the sound file, e.g. its file name, path, duration.
It can be created with the SOUNDFILE.New(FileName, Path, Duration) function:
local soundfile=SOUNDFILE:New("My Soundfile.ogg", "Sound File/", 3.5)
SRS
If sound files are supposed to be played via SRS, you need to use the SOUNDFILE.SetPlayWithSRS() function.
Location/Path
DCS
DCS can only play sound files that are located inside the mission (.miz) file. In particular, DCS cannot make use of files that are stored on your hard drive.
The default location where sound files are stored in DCS is the directory "l10n/DEFAULT/". This is where sound files are placed, if they are added via the mission editor (TRIGGERS-->ACTIONS-->SOUND TO ALL). Note however, that sound files which are not added with a trigger command, will be deleted each time the mission is saved! Therefore, this directory is not ideal to be used especially if many sound files are to be included since for each file a trigger action needs to be created. Which is cumbersome, to say the least.
The recommended way is to create a new folder inside the mission (.miz) file (a miz file is essentially zip file and can be opened, e.g., with 7-Zip) and to place the sound files in there. Sound files in these folders are not wiped out by DCS on the next save.
SRS
SRS sound files need to be located on your local drive (not inside the miz). Therefore, you need to specify the full path.
Global SOUNDTEXT |
Text-to-speech objects for other classes. |
Text-to-speech objects for other classes.
The SOUNDTEXT Concept
A SOUNDTEXT object holds all necessary information to play a general text via SRS Simple-Text-To-Speech.
It can be created with the SOUNDTEXT.New(Text, Duration) function.
- SOUNDTEXT.New(Text, Duration): Creates a new SOUNDTEXT object.
Options
Gender
You can choose a gender ("male" or "femal") with the SOUNDTEXT.SetGender(Gender) function. Note that the gender voice needs to be installed on your windows machine for the used culture (see below).
Culture
You can choose a "culture" (accent) with the SOUNDTEXT.SetCulture(Culture) function, where the default (SRS) culture is "en-GB".
Other examples for culture are: "en-US" (US accent), "de-DE" (German), "it-IT" (Italian), "ru-RU" (Russian), "zh-CN" (Chinese).
Note that the chosen culture needs to be installed on your windows machine.
Specific Voice
You can use a specific voice for the transmission with the SOUNDTEXT.SetVoice(VoiceName) function. Here are some examples
- Name: Microsoft Hazel Desktop, Culture: en-GB, Gender: Female, Age: Adult, Desc: Microsoft Hazel Desktop - English (Great Britain)
- Name: Microsoft David Desktop, Culture: en-US, Gender: Male, Age: Adult, Desc: Microsoft David Desktop - English (United States)
- Name: Microsoft Zira Desktop, Culture: en-US, Gender: Female, Age: Adult, Desc: Microsoft Zira Desktop - English (United States)
- Name: Microsoft Hedda Desktop, Culture: de-DE, Gender: Female, Age: Adult, Desc: Microsoft Hedda Desktop - German
- Name: Microsoft Helena Desktop, Culture: es-ES, Gender: Female, Age: Adult, Desc: Microsoft Helena Desktop - Spanish (Spain)
- Name: Microsoft Hortense Desktop, Culture: fr-FR, Gender: Female, Age: Adult, Desc: Microsoft Hortense Desktop - French
- Name: Microsoft Elsa Desktop, Culture: it-IT, Gender: Female, Age: Adult, Desc: Microsoft Elsa Desktop - Italian (Italy)
- Name: Microsoft Irina Desktop, Culture: ru-RU, Gender: Female, Age: Adult, Desc: Microsoft Irina Desktop - Russian
- Name: Microsoft Huihui Desktop, Culture: zh-CN, Gender: Female, Age: Adult, Desc: Microsoft Huihui Desktop - Chinese (Simplified)
Note that this must be installed on your windos machine. Also note that this overrides any culture and gender settings.
Type(s)
Fields and Methods inherited from SOUNDBASE | Description |
---|---|
Name of the class. |
|
SOUNDBASE.GetSpeechTime(Text, Speed, isGoogle, self, length, speed) |
Function returns estimated speech time in seconds. |
Constructor to create a new SOUNDBASE object. |
Fields and Methods inherited from BASE | Description |
---|---|
The ID number of the class. |
|
The name of the class. |
|
The name of the class concatenated with the ID number of the class. |
|
Clear the state of an object. |
|
SOUNDBASE:CreateEventBirth(EventTime, Initiator, IniUnitName, place, subplace) |
Creation of a Birth Event. |
SOUNDBASE:CreateEventCrash(EventTime, Initiator, IniObjectCategory) |
Creation of a Crash Event. |
SOUNDBASE:CreateEventDead(EventTime, Initiator, IniObjectCategory) |
Creation of a Dead Event. |
Creation of a |
|
Creation of a Remove Unit Event. |
|
Creation of a Takeoff Event. |
|
Creation of a Crash Event. |
|
Log an exception which will be traced always. |
|
Returns the event dispatcher |
|
Remove all subscribed events |
|
Trace a function call. |
|
Trace a function call level 2. |
|
Trace a function call level 3. |
|
Get the ClassID of the class instance. |
|
Get the ClassName of the class instance. |
|
Get the ClassName + ClassID of the class instance. |
|
Get the Class Core.Event processing Priority. |
|
This is the worker method to retrieve the Parent class. |
|
Get a Value given a Key from the Object. |
|
Subscribe to a DCS Event. |
|
Log an information which will be traced always. |
|
This is the worker method to inherit from a parent class. |
|
This is the worker method to check if an object is an (sub)instance of a class. |
|
Enquires if tracing is on (for the class). |
|
BASE constructor. |
|
Occurs when an Event for an object is triggered. |
|
BDA. |
|
Occurs when a ground unit captures either an airbase or a farp. |
|
Occurs when any object is spawned into the mission. |
|
Occurs when any aircraft crashes into the ground and is completely destroyed. |
|
Occurs when an object is dead. |
|
Unknown precisely what creates this event, likely tied into newer damage model. |
|
Discard chair after ejection. |
|
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when any aircraft shuts down its engines. |
|
Occurs when any aircraft starts its engines. |
|
Occurs whenever an object is hit by a weapon. |
|
Occurs when any system fails on a human controlled aircraft. |
|
Occurs on the death of a unit. |
|
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up. |
|
Landing quality mark. |
|
Occurs when a new mark was added. |
|
Occurs when a mark text was changed. |
|
Occurs when a mark was removed. |
|
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Weapon add. |
|
Occurs when the pilot of an aircraft is killed. |
|
Occurs when a player enters a slot and takes control of an aircraft. |
|
Occurs when any player assumes direct control of a unit. |
|
Occurs when any player relieves control of a unit to the AI. |
|
Occurs when an aircraft connects with a tanker and begins taking on fuel. |
|
Occurs when an aircraft is finished taking fuel. |
|
Occurs when any modification to the "Score" as seen on the debrief menu would occur. |
|
Occurs when any unit stops firing its weapon. |
|
Occurs when any unit begins firing a weapon that has a high rate of fire. |
|
Occurs whenever any unit in a mission fires a weapon. |
|
Occurs when an aircraft takes off from an airbase, farp, or ship. |
|
Trigger zone. |
|
Occurs when the game thinks an object is destroyed. |
|
Schedule a new time event. |
|
SOUNDBASE:ScheduleRepeat(Start, Repeat, RandomizeFactor, Stop, SchedulerFunction, ...) |
Schedule a new time event. |
Stops the Schedule. |
|
Set the Class Core.Event processing Priority. |
|
Set a state or property of the Object given a Key and a Value. |
|
Trace a function logic level 1. |
|
Trace a function logic level 2. |
|
Trace a function logic level 3. |
|
Trace all methods in MOOSE |
|
Set tracing for a class |
|
Set tracing for a specific method of class |
|
Set trace level |
|
Set trace off. |
|
Set trace on. |
|
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default. |
|
UnSubscribe to a DCS event. |
|
SOUNDBASE:_F(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function call. |
SOUNDBASE:_T(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function logic. |
The main event handling function... |
Fields and Methods inherited from SOUNDFILE | Description |
---|---|
Name of the class |
|
Get duration how long the sound file takes to play. |
|
Get the sound file name. |
|
Get the complete sound file name inlcuding its path. |
|
Get path of the directory, where the sound file is located. |
|
Constructor to create a new SOUNDFILE object. |
|
Set duration how long it takes to play the sound file. |
|
Set sound file name. |
|
Set path, where the sound file is located. |
|
Set whether sound files should be played via SRS. |
|
Duration of the sound file in seconds. |
|
Name of the flag. |
|
Directory path, where the sound file is located. This includes the final slash "/". |
|
Duration in seconds how long the subtitle is displayed. |
|
Subtitle of the transmission. |
|
If true, sound file is played via SRS. Sound file needs to be on local disk not inside the miz file! |
Fields and Methods inherited from BASE | Description |
---|---|
The ID number of the class. |
|
The name of the class. |
|
The name of the class concatenated with the ID number of the class. |
|
Clear the state of an object. |
|
SOUNDFILE:CreateEventBirth(EventTime, Initiator, IniUnitName, place, subplace) |
Creation of a Birth Event. |
SOUNDFILE:CreateEventCrash(EventTime, Initiator, IniObjectCategory) |
Creation of a Crash Event. |
SOUNDFILE:CreateEventDead(EventTime, Initiator, IniObjectCategory) |
Creation of a Dead Event. |
Creation of a |
|
Creation of a Remove Unit Event. |
|
Creation of a Takeoff Event. |
|
Creation of a Crash Event. |
|
Log an exception which will be traced always. |
|
Returns the event dispatcher |
|
Remove all subscribed events |
|
Trace a function call. |
|
Trace a function call level 2. |
|
Trace a function call level 3. |
|
Get the ClassID of the class instance. |
|
Get the ClassName of the class instance. |
|
Get the ClassName + ClassID of the class instance. |
|
Get the Class Core.Event processing Priority. |
|
This is the worker method to retrieve the Parent class. |
|
Get a Value given a Key from the Object. |
|
Subscribe to a DCS Event. |
|
Log an information which will be traced always. |
|
This is the worker method to inherit from a parent class. |
|
This is the worker method to check if an object is an (sub)instance of a class. |
|
Enquires if tracing is on (for the class). |
|
BASE constructor. |
|
Occurs when an Event for an object is triggered. |
|
BDA. |
|
Occurs when a ground unit captures either an airbase or a farp. |
|
Occurs when any object is spawned into the mission. |
|
Occurs when any aircraft crashes into the ground and is completely destroyed. |
|
Occurs when an object is dead. |
|
Unknown precisely what creates this event, likely tied into newer damage model. |
|
Discard chair after ejection. |
|
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when any aircraft shuts down its engines. |
|
Occurs when any aircraft starts its engines. |
|
Occurs whenever an object is hit by a weapon. |
|
Occurs when any system fails on a human controlled aircraft. |
|
Occurs on the death of a unit. |
|
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up. |
|
Landing quality mark. |
|
Occurs when a new mark was added. |
|
Occurs when a mark text was changed. |
|
Occurs when a mark was removed. |
|
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Weapon add. |
|
Occurs when the pilot of an aircraft is killed. |
|
Occurs when a player enters a slot and takes control of an aircraft. |
|
Occurs when any player assumes direct control of a unit. |
|
Occurs when any player relieves control of a unit to the AI. |
|
Occurs when an aircraft connects with a tanker and begins taking on fuel. |
|
Occurs when an aircraft is finished taking fuel. |
|
Occurs when any modification to the "Score" as seen on the debrief menu would occur. |
|
Occurs when any unit stops firing its weapon. |
|
Occurs when any unit begins firing a weapon that has a high rate of fire. |
|
Occurs whenever any unit in a mission fires a weapon. |
|
Occurs when an aircraft takes off from an airbase, farp, or ship. |
|
Trigger zone. |
|
Occurs when the game thinks an object is destroyed. |
|
Schedule a new time event. |
|
SOUNDFILE:ScheduleRepeat(Start, Repeat, RandomizeFactor, Stop, SchedulerFunction, ...) |
Schedule a new time event. |
Stops the Schedule. |
|
Set the Class Core.Event processing Priority. |
|
Set a state or property of the Object given a Key and a Value. |
|
Trace a function logic level 1. |
|
Trace a function logic level 2. |
|
Trace a function logic level 3. |
|
Trace all methods in MOOSE |
|
Set tracing for a class |
|
Set tracing for a specific method of class |
|
Set trace level |
|
Set trace off. |
|
Set trace on. |
|
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default. |
|
UnSubscribe to a DCS event. |
|
SOUNDFILE:_F(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function call. |
SOUNDFILE:_T(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function logic. |
The main event handling function... |
Fields and Methods inherited from SOUNDTEXT | Description |
---|---|
Name of the class |
|
Constructor to create a new SOUNDTEXT object. |
|
Set TTS culture - local for the voice. |
|
Set duration, how long it takes to speak the text. |
|
Set gender. |
|
Set text. |
|
Set to use a specific voice name. |
|
Culture, e.g. "en-GB". |
|
Duration in seconds. |
|
Gender: "male", "female". |
|
Text to speak. |
|
Specific voice to use. Overrules |
Fields and Methods inherited from BASE | Description |
---|---|
The ID number of the class. |
|
The name of the class. |
|
The name of the class concatenated with the ID number of the class. |
|
Clear the state of an object. |
|
SOUNDTEXT:CreateEventBirth(EventTime, Initiator, IniUnitName, place, subplace) |
Creation of a Birth Event. |
SOUNDTEXT:CreateEventCrash(EventTime, Initiator, IniObjectCategory) |
Creation of a Crash Event. |
SOUNDTEXT:CreateEventDead(EventTime, Initiator, IniObjectCategory) |
Creation of a Dead Event. |
Creation of a |
|
Creation of a Remove Unit Event. |
|
Creation of a Takeoff Event. |
|
Creation of a Crash Event. |
|
Log an exception which will be traced always. |
|
Returns the event dispatcher |
|
Remove all subscribed events |
|
Trace a function call. |
|
Trace a function call level 2. |
|
Trace a function call level 3. |
|
Get the ClassID of the class instance. |
|
Get the ClassName of the class instance. |
|
Get the ClassName + ClassID of the class instance. |
|
Get the Class Core.Event processing Priority. |
|
This is the worker method to retrieve the Parent class. |
|
Get a Value given a Key from the Object. |
|
Subscribe to a DCS Event. |
|
Log an information which will be traced always. |
|
This is the worker method to inherit from a parent class. |
|
This is the worker method to check if an object is an (sub)instance of a class. |
|
Enquires if tracing is on (for the class). |
|
BASE constructor. |
|
Occurs when an Event for an object is triggered. |
|
BDA. |
|
Occurs when a ground unit captures either an airbase or a farp. |
|
Occurs when any object is spawned into the mission. |
|
Occurs when any aircraft crashes into the ground and is completely destroyed. |
|
Occurs when an object is dead. |
|
Unknown precisely what creates this event, likely tied into newer damage model. |
|
Discard chair after ejection. |
|
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when any aircraft shuts down its engines. |
|
Occurs when any aircraft starts its engines. |
|
Occurs whenever an object is hit by a weapon. |
|
Occurs when any system fails on a human controlled aircraft. |
|
Occurs on the death of a unit. |
|
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up. |
|
Landing quality mark. |
|
Occurs when a new mark was added. |
|
Occurs when a mark text was changed. |
|
Occurs when a mark was removed. |
|
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
Weapon add. |
|
Occurs when the pilot of an aircraft is killed. |
|
Occurs when a player enters a slot and takes control of an aircraft. |
|
Occurs when any player assumes direct control of a unit. |
|
Occurs when any player relieves control of a unit to the AI. |
|
Occurs when an aircraft connects with a tanker and begins taking on fuel. |
|
Occurs when an aircraft is finished taking fuel. |
|
Occurs when any modification to the "Score" as seen on the debrief menu would occur. |
|
Occurs when any unit stops firing its weapon. |
|
Occurs when any unit begins firing a weapon that has a high rate of fire. |
|
Occurs whenever any unit in a mission fires a weapon. |
|
Occurs when an aircraft takes off from an airbase, farp, or ship. |
|
Trigger zone. |
|
Occurs when the game thinks an object is destroyed. |
|
Schedule a new time event. |
|
SOUNDTEXT:ScheduleRepeat(Start, Repeat, RandomizeFactor, Stop, SchedulerFunction, ...) |
Schedule a new time event. |
Stops the Schedule. |
|
Set the Class Core.Event processing Priority. |
|
Set a state or property of the Object given a Key and a Value. |
|
Trace a function logic level 1. |
|
Trace a function logic level 2. |
|
Trace a function logic level 3. |
|
Trace all methods in MOOSE |
|
Set tracing for a class |
|
Set tracing for a specific method of class |
|
Set trace level |
|
Set trace off. |
|
Set trace on. |
|
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default. |
|
UnSubscribe to a DCS event. |
|
SOUNDTEXT:_F(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function call. |
SOUNDTEXT:_T(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function logic. |
The main event handling function... |
Field(s)
Name of the class.
Function(s)
Function returns estimated speech time in seconds.
Assumptions for time calc: 100 Words per min, avarage of 5 letters for english word so
- 5 chars * 100wpm = 500 characters per min = 8.3 chars per second
So lengh of msg / 8.3 = number of seconds needed to read it. rounded down to 8 chars per sec map function:
- (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min
Defined in:
SOUNDBASE
Parameters:
#string Text
The text string to analyze.
#number Speed
Speed factor. Default 1.
#boolean isGoogle
If true, google text-to-speech is used.
self
length
speed
Constructor to create a new SOUNDBASE object.
Field(s)
Name of the class.
Function(s)
Clear the state of an object.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
StateName
The key that is should be cleared.
Creation of a Birth Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
#string IniUnitName
The initiating unit name.
place
subplace
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a Dead Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a S_EVENT_PLAYER_ENTER_AIRCRAFT
event.
Creation of a Remove Unit Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Takeoff Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Log an exception which will be traced always.
Can be anywhere within the function logic.
Returns the event dispatcher
Remove all subscribed events
Trace a function call.
Must be at the beginning of the function logic.
Trace a function call level 2.
Must be at the beginning of the function logic.
Trace a function call level 3.
Must be at the beginning of the function logic.
Get the ClassID of the class instance.
Get the ClassName of the class instance.
Get the ClassName + ClassID of the class instance.
The ClassName + ClassID is formatted as '%s#%09d'.
Get the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
This is the worker method to retrieve the Parent class.
Note that the Parent class must be passed to call the parent class method.
self:GetParent(self):ParentMethod()
Get a Value given a Key from the Object.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
Key
The key that is used to retrieve the value. Note that the key can be a #string, but it can also be any other type!
Return value:
The Value retrieved or nil if the Key was not found and thus the Value could not be retrieved.
Subscribe to a DCS Event.
Defined in:
Parameters:
Core.Event#EVENTS EventID
Event ID.
#function EventFunction
(optional) The function to be called when the event occurs for the unit.
Return value:
Log an information which will be traced always.
Can be anywhere within the function logic.
This is the worker method to inherit from a parent class.
Defined in:
Parameters:
Child
is the Child class that inherits.
#BASE Parent
is the Parent class that the Child inherits from.
Return value:
Child
This is the worker method to check if an object is an (sub)instance of a class.
Examples:
ZONE:New( 'some zone' ):IsInstanceOf( ZONE ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'ZONE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'zone' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'BASE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'GROUP' ) will return false
Defined in:
Parameter:
ClassName
is the name of the class or the class itself to run the check against
Return value:
#boolean:
Enquires if tracing is on (for the class).
BASE constructor.
This is an example how to use the BASE:New() constructor in a new class definition when inheriting from BASE.
function EVENT:New()
local self = BASE:Inherit( self, BASE:New() ) -- #EVENT
return self
end
Occurs when an Event for an object is triggered.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that triggered the event.
Occurs when a ground unit captures either an airbase or a farp.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that captured the base place: The airbase that was captured, can be a FARP or Airbase. When calling place:getCoalition() the faction will already be the new owning faction.
Occurs when any object is spawned into the mission.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was spawned
Occurs when any aircraft crashes into the ground and is completely destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that has crashed
Occurs when an object is dead.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is dead.
Unknown precisely what creates this event, likely tied into newer damage model.
Will update this page when new information become available.
- initiator: The unit that had the failure.
Discard chair after ejection.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has ejected
Occurs when any aircraft shuts down its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is stopping its engines.
Occurs when any aircraft starts its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is starting its engines.
Occurs whenever an object is hit by a weapon.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit object the fired the weapon weapon: Weapon object that hit the target target: The Object that was hit.
Occurs when any system fails on a human controlled aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that had the failure
Occurs on the death of a unit.
Contains more and different information. Similar to unit_lost it will occur for aircraft before the aircraft crash event occurs. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that killed the target
- target: Target Object
- weapon: Weapon Object
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has landed place: Object that the unit landed on. Can be an Airbase Object, FARP, or Ships
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up.
Event does not occur if the pilot lands in the water and sub combs to Davey Jones Locker. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: Static object representing the ejected pilot. Place : Aircraft that the pilot ejected from.
- place: may not return as a valid object if the aircraft has crashed into the ground and no longer exists.
- subplace: is always 0 for unknown reasons.
Occurs when a new mark was added.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark text was changed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark was removed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes.
Weapon add.
Fires when entering a mission per pylon with the name of the weapon (double pylons not counted, infinite wep reload not counted. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when the pilot of an aircraft is killed.
Can occur either if the player is alive and crashes or if a weapon kills the pilot without completely destroying the plane. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the pilot has died in.
Occurs when a player enters a slot and takes control of an aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. NOTE: This is a workaround of a long standing DCS bug with the PLAYER_ENTER_UNIT event. initiator : The unit that is being taken control of.
Occurs when any player assumes direct control of a unit.
Note - not Mulitplayer safe. Use PlayerEnterAircraft. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is being taken control of.
Occurs when any player relieves control of a unit to the AI.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the player left.
Occurs when an aircraft connects with a tanker and begins taking on fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is receiving fuel.
Occurs when an aircraft is finished taking fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was receiving fuel.
Occurs when any modification to the "Score" as seen on the debrief menu would occur.
There is no information on what values the score was changed to. Event is likely similar to player_comment in this regard. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when any unit stops firing its weapon.
Event will always correspond with a shooting start event. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was doing the shooting.
Occurs when any unit begins firing a weapon that has a high rate of fire.
Most common with aircraft cannons (GAU-8), autocannons, and machine guns. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is doing the shooting. target: The unit that is being targeted.
Occurs whenever any unit in a mission fires a weapon.
But not any machine gun or autocannon based weapon, those are handled by EVENT.ShootingStart. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when an aircraft takes off from an airbase, farp, or ship.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that tookoff place: Object from where the AI took-off from. Can be an Airbase Object, FARP, or Ships
Occurs when the game thinks an object is destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that is was destroyed.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#number Repeat
Specifies the interval in seconds when the scheduler will call the event function.
#number RandomizeFactor
Specifies a randomization factor between 0 and 1 to randomize the Repeat.
#number Stop
Specifies the amount of seconds when the scheduler will be stopped.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Stops the Schedule.
Defined in:
Parameter:
#string SchedulerID
(Optional) Scheduler ID to be stopped. If nil, all pending schedules are stopped.
Set the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
Set a state or property of the Object given a Key and a Value.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that will hold the Value set by the Key.
Key
The key that is used as a reference of the value. Note that the key can be a #string, but it can also be any other type!
Value
The value to is stored in the object.
Return value:
The Value set.
Trace a function logic level 1.
Can be anywhere within the function logic.
Trace a function logic level 2.
Can be anywhere within the function logic.
Trace a function logic level 3.
Can be anywhere within the function logic.
Trace all methods in MOOSE
Set tracing for a class
Set tracing for a specific method of class
Set trace off.
Set trace on.
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default.
So tracing must be switched on manually in your mission if you are using Moose statically. When moose is loading dynamically (for moose class development), tracing is switched on by default.
Defined in:
Parameter:
#boolean TraceOnOff
Switch the tracing on or off.
Usage:
-- Switch the tracing On
BASE:TraceOnOff( true )
-- Switch the tracing Off
BASE:TraceOnOff( false )
UnSubscribe to a DCS event.
Trace a function call.
This function is private.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
Trace a function logic.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
The main event handling function...
This function captures all events generated for the class.
Field(s)
Name of the class
Duration of the sound file in seconds.
Name of the flag.
Directory path, where the sound file is located. This includes the final slash "/".
Duration in seconds how long the subtitle is displayed.
Subtitle of the transmission.
If true, sound file is played via SRS. Sound file needs to be on local disk not inside the miz file!
Function(s)
Get duration how long the sound file takes to play.
Defined in:
SOUNDFILE
Return value:
#number:
Duration in seconds.
Get the sound file name.
Defined in:
SOUNDFILE
Return value:
#string:
Name of the soud file. This does not include its path.
Get the complete sound file name inlcuding its path.
Defined in:
SOUNDFILE
Return value:
#string:
Name of the sound file.
Get path of the directory, where the sound file is located.
Defined in:
SOUNDFILE
Return value:
#string:
Path.
Constructor to create a new SOUNDFILE object.
Defined in:
SOUNDFILE
Parameters:
#string FileName
The name of the sound file, e.g. "Hello World.ogg".
#string Path
The path of the directory, where the sound file is located. Default is "l10n/DEFAULT/" within the miz file.
#number Duration
Duration in seconds, how long it takes to play the sound file. Default is 3 seconds.
Return value:
self
Set duration how long it takes to play the sound file.
Defined in:
SOUNDFILE
Parameter:
#string Duration
Duration in seconds. Default 3 seconds.
Return value:
self
Set sound file name.
This must be a .ogg or .mp3 file!
Defined in:
SOUNDFILE
Parameter:
#string FileName
Name of the file. Default is "Hello World.mp3".
Return value:
self
Set path, where the sound file is located.
Defined in:
SOUNDFILE
Parameter:
#string Path
Path to the directory, where the sound file is located. In case this is nil, it defaults to the DCS mission temp directory.
Return value:
self
Set whether sound files should be played via SRS.
Defined in:
SOUNDFILE
Parameter:
#boolean Switch
If true or nil, use SRS. If false, use DCS transmission.
Return value:
self
Field(s)
Name of the class
Duration of the sound file in seconds.
Name of the flag.
Directory path, where the sound file is located. This includes the final slash "/".
Duration in seconds how long the subtitle is displayed.
Subtitle of the transmission.
If true, sound file is played via SRS. Sound file needs to be on local disk not inside the miz file!
Function(s)
Clear the state of an object.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
StateName
The key that is should be cleared.
Creation of a Birth Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
#string IniUnitName
The initiating unit name.
place
subplace
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a Dead Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a S_EVENT_PLAYER_ENTER_AIRCRAFT
event.
Creation of a Remove Unit Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Takeoff Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Log an exception which will be traced always.
Can be anywhere within the function logic.
Returns the event dispatcher
Remove all subscribed events
Trace a function call.
Must be at the beginning of the function logic.
Trace a function call level 2.
Must be at the beginning of the function logic.
Trace a function call level 3.
Must be at the beginning of the function logic.
Get the ClassID of the class instance.
Get the ClassName of the class instance.
Get the ClassName + ClassID of the class instance.
The ClassName + ClassID is formatted as '%s#%09d'.
Get the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
This is the worker method to retrieve the Parent class.
Note that the Parent class must be passed to call the parent class method.
self:GetParent(self):ParentMethod()
Get a Value given a Key from the Object.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
Key
The key that is used to retrieve the value. Note that the key can be a #string, but it can also be any other type!
Return value:
The Value retrieved or nil if the Key was not found and thus the Value could not be retrieved.
Subscribe to a DCS Event.
Defined in:
Parameters:
Core.Event#EVENTS EventID
Event ID.
#function EventFunction
(optional) The function to be called when the event occurs for the unit.
Return value:
Log an information which will be traced always.
Can be anywhere within the function logic.
This is the worker method to inherit from a parent class.
Defined in:
Parameters:
Child
is the Child class that inherits.
#BASE Parent
is the Parent class that the Child inherits from.
Return value:
Child
This is the worker method to check if an object is an (sub)instance of a class.
Examples:
ZONE:New( 'some zone' ):IsInstanceOf( ZONE ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'ZONE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'zone' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'BASE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'GROUP' ) will return false
Defined in:
Parameter:
ClassName
is the name of the class or the class itself to run the check against
Return value:
#boolean:
Enquires if tracing is on (for the class).
BASE constructor.
This is an example how to use the BASE:New() constructor in a new class definition when inheriting from BASE.
function EVENT:New()
local self = BASE:Inherit( self, BASE:New() ) -- #EVENT
return self
end
Occurs when an Event for an object is triggered.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that triggered the event.
Occurs when a ground unit captures either an airbase or a farp.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that captured the base place: The airbase that was captured, can be a FARP or Airbase. When calling place:getCoalition() the faction will already be the new owning faction.
Occurs when any object is spawned into the mission.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was spawned
Occurs when any aircraft crashes into the ground and is completely destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that has crashed
Occurs when an object is dead.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is dead.
Unknown precisely what creates this event, likely tied into newer damage model.
Will update this page when new information become available.
- initiator: The unit that had the failure.
Discard chair after ejection.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has ejected
Occurs when any aircraft shuts down its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is stopping its engines.
Occurs when any aircraft starts its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is starting its engines.
Occurs whenever an object is hit by a weapon.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit object the fired the weapon weapon: Weapon object that hit the target target: The Object that was hit.
Occurs when any system fails on a human controlled aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that had the failure
Occurs on the death of a unit.
Contains more and different information. Similar to unit_lost it will occur for aircraft before the aircraft crash event occurs. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that killed the target
- target: Target Object
- weapon: Weapon Object
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has landed place: Object that the unit landed on. Can be an Airbase Object, FARP, or Ships
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up.
Event does not occur if the pilot lands in the water and sub combs to Davey Jones Locker. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: Static object representing the ejected pilot. Place : Aircraft that the pilot ejected from.
- place: may not return as a valid object if the aircraft has crashed into the ground and no longer exists.
- subplace: is always 0 for unknown reasons.
Occurs when a new mark was added.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark text was changed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark was removed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes.
Weapon add.
Fires when entering a mission per pylon with the name of the weapon (double pylons not counted, infinite wep reload not counted. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when the pilot of an aircraft is killed.
Can occur either if the player is alive and crashes or if a weapon kills the pilot without completely destroying the plane. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the pilot has died in.
Occurs when a player enters a slot and takes control of an aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. NOTE: This is a workaround of a long standing DCS bug with the PLAYER_ENTER_UNIT event. initiator : The unit that is being taken control of.
Occurs when any player assumes direct control of a unit.
Note - not Mulitplayer safe. Use PlayerEnterAircraft. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is being taken control of.
Occurs when any player relieves control of a unit to the AI.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the player left.
Occurs when an aircraft connects with a tanker and begins taking on fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is receiving fuel.
Occurs when an aircraft is finished taking fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was receiving fuel.
Occurs when any modification to the "Score" as seen on the debrief menu would occur.
There is no information on what values the score was changed to. Event is likely similar to player_comment in this regard. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when any unit stops firing its weapon.
Event will always correspond with a shooting start event. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was doing the shooting.
Occurs when any unit begins firing a weapon that has a high rate of fire.
Most common with aircraft cannons (GAU-8), autocannons, and machine guns. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is doing the shooting. target: The unit that is being targeted.
Occurs whenever any unit in a mission fires a weapon.
But not any machine gun or autocannon based weapon, those are handled by EVENT.ShootingStart. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when an aircraft takes off from an airbase, farp, or ship.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that tookoff place: Object from where the AI took-off from. Can be an Airbase Object, FARP, or Ships
Occurs when the game thinks an object is destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that is was destroyed.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#number Repeat
Specifies the interval in seconds when the scheduler will call the event function.
#number RandomizeFactor
Specifies a randomization factor between 0 and 1 to randomize the Repeat.
#number Stop
Specifies the amount of seconds when the scheduler will be stopped.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Stops the Schedule.
Defined in:
Parameter:
#string SchedulerID
(Optional) Scheduler ID to be stopped. If nil, all pending schedules are stopped.
Set the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
Set a state or property of the Object given a Key and a Value.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that will hold the Value set by the Key.
Key
The key that is used as a reference of the value. Note that the key can be a #string, but it can also be any other type!
Value
The value to is stored in the object.
Return value:
The Value set.
Trace a function logic level 1.
Can be anywhere within the function logic.
Trace a function logic level 2.
Can be anywhere within the function logic.
Trace a function logic level 3.
Can be anywhere within the function logic.
Trace all methods in MOOSE
Set tracing for a class
Set tracing for a specific method of class
Set trace off.
Set trace on.
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default.
So tracing must be switched on manually in your mission if you are using Moose statically. When moose is loading dynamically (for moose class development), tracing is switched on by default.
Defined in:
Parameter:
#boolean TraceOnOff
Switch the tracing on or off.
Usage:
-- Switch the tracing On
BASE:TraceOnOff( true )
-- Switch the tracing Off
BASE:TraceOnOff( false )
UnSubscribe to a DCS event.
Trace a function call.
This function is private.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
Trace a function logic.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
The main event handling function...
This function captures all events generated for the class.
Field(s)
Name of the class
Culture, e.g. "en-GB".
Duration in seconds.
Gender: "male", "female".
Text to speak.
Specific voice to use. Overrules gender
and culture
settings.
Function(s)
Constructor to create a new SOUNDTEXT object.
Defined in:
SOUNDTEXT
Parameters:
#string Text
The text to speak.
#number Duration
Duration in seconds, how long it takes to play the text. Default is 3 seconds.
Return value:
self
Set TTS culture - local for the voice.
Defined in:
SOUNDTEXT
Parameter:
#string Culture
TTS culture. Default "en-GB".
Return value:
self
Set duration, how long it takes to speak the text.
Defined in:
SOUNDTEXT
Parameter:
#number Duration
Duration in seconds. Default 3 seconds.
Return value:
self
Set gender.
Defined in:
SOUNDTEXT
Parameter:
#string Gender
Gender: "male" or "female" (default).
Return value:
self
Set text.
Defined in:
SOUNDTEXT
Parameter:
#string Text
Text to speak. Default "Hello World!".
Return value:
self
Set to use a specific voice name.
See the list from DCS-SR-ExternalAudio.exe --help
or if using google see google voices.
Defined in:
SOUNDTEXT
Parameter:
#string VoiceName
Voice name. Note that this will overrule Gender
and Culture
.
Return value:
self
Field(s)
Name of the class
Culture, e.g. "en-GB".
Duration in seconds.
Gender: "male", "female".
Text to speak.
Specific voice to use. Overrules gender
and culture
settings.
Function(s)
Clear the state of an object.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
StateName
The key that is should be cleared.
Creation of a Birth Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
#string IniUnitName
The initiating unit name.
place
subplace
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a Dead Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a S_EVENT_PLAYER_ENTER_AIRCRAFT
event.
Creation of a Remove Unit Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Takeoff Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Log an exception which will be traced always.
Can be anywhere within the function logic.
Returns the event dispatcher
Remove all subscribed events
Trace a function call.
Must be at the beginning of the function logic.
Trace a function call level 2.
Must be at the beginning of the function logic.
Trace a function call level 3.
Must be at the beginning of the function logic.
Get the ClassID of the class instance.
Get the ClassName of the class instance.
Get the ClassName + ClassID of the class instance.
The ClassName + ClassID is formatted as '%s#%09d'.
Get the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
This is the worker method to retrieve the Parent class.
Note that the Parent class must be passed to call the parent class method.
self:GetParent(self):ParentMethod()
Get a Value given a Key from the Object.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
Key
The key that is used to retrieve the value. Note that the key can be a #string, but it can also be any other type!
Return value:
The Value retrieved or nil if the Key was not found and thus the Value could not be retrieved.
Subscribe to a DCS Event.
Defined in:
Parameters:
Core.Event#EVENTS EventID
Event ID.
#function EventFunction
(optional) The function to be called when the event occurs for the unit.
Return value:
Log an information which will be traced always.
Can be anywhere within the function logic.
This is the worker method to inherit from a parent class.
Defined in:
Parameters:
Child
is the Child class that inherits.
#BASE Parent
is the Parent class that the Child inherits from.
Return value:
Child
This is the worker method to check if an object is an (sub)instance of a class.
Examples:
ZONE:New( 'some zone' ):IsInstanceOf( ZONE ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'ZONE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'zone' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'BASE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'GROUP' ) will return false
Defined in:
Parameter:
ClassName
is the name of the class or the class itself to run the check against
Return value:
#boolean:
Enquires if tracing is on (for the class).
BASE constructor.
This is an example how to use the BASE:New() constructor in a new class definition when inheriting from BASE.
function EVENT:New()
local self = BASE:Inherit( self, BASE:New() ) -- #EVENT
return self
end
Occurs when an Event for an object is triggered.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that triggered the event.
Occurs when a ground unit captures either an airbase or a farp.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that captured the base place: The airbase that was captured, can be a FARP or Airbase. When calling place:getCoalition() the faction will already be the new owning faction.
Occurs when any object is spawned into the mission.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was spawned
Occurs when any aircraft crashes into the ground and is completely destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that has crashed
Occurs when an object is dead.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is dead.
Unknown precisely what creates this event, likely tied into newer damage model.
Will update this page when new information become available.
- initiator: The unit that had the failure.
Discard chair after ejection.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has ejected
Occurs when any aircraft shuts down its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is stopping its engines.
Occurs when any aircraft starts its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is starting its engines.
Occurs whenever an object is hit by a weapon.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit object the fired the weapon weapon: Weapon object that hit the target target: The Object that was hit.
Occurs when any system fails on a human controlled aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that had the failure
Occurs on the death of a unit.
Contains more and different information. Similar to unit_lost it will occur for aircraft before the aircraft crash event occurs. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that killed the target
- target: Target Object
- weapon: Weapon Object
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has landed place: Object that the unit landed on. Can be an Airbase Object, FARP, or Ships
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up.
Event does not occur if the pilot lands in the water and sub combs to Davey Jones Locker. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: Static object representing the ejected pilot. Place : Aircraft that the pilot ejected from.
- place: may not return as a valid object if the aircraft has crashed into the ground and no longer exists.
- subplace: is always 0 for unknown reasons.
Occurs when a new mark was added.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark text was changed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark was removed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes.
Weapon add.
Fires when entering a mission per pylon with the name of the weapon (double pylons not counted, infinite wep reload not counted. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when the pilot of an aircraft is killed.
Can occur either if the player is alive and crashes or if a weapon kills the pilot without completely destroying the plane. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the pilot has died in.
Occurs when a player enters a slot and takes control of an aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. NOTE: This is a workaround of a long standing DCS bug with the PLAYER_ENTER_UNIT event. initiator : The unit that is being taken control of.
Occurs when any player assumes direct control of a unit.
Note - not Mulitplayer safe. Use PlayerEnterAircraft. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is being taken control of.
Occurs when any player relieves control of a unit to the AI.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the player left.
Occurs when an aircraft connects with a tanker and begins taking on fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is receiving fuel.
Occurs when an aircraft is finished taking fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was receiving fuel.
Occurs when any modification to the "Score" as seen on the debrief menu would occur.
There is no information on what values the score was changed to. Event is likely similar to player_comment in this regard. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when any unit stops firing its weapon.
Event will always correspond with a shooting start event. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was doing the shooting.
Occurs when any unit begins firing a weapon that has a high rate of fire.
Most common with aircraft cannons (GAU-8), autocannons, and machine guns. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is doing the shooting. target: The unit that is being targeted.
Occurs whenever any unit in a mission fires a weapon.
But not any machine gun or autocannon based weapon, those are handled by EVENT.ShootingStart. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when an aircraft takes off from an airbase, farp, or ship.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that tookoff place: Object from where the AI took-off from. Can be an Airbase Object, FARP, or Ships
Occurs when the game thinks an object is destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that is was destroyed.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#number Repeat
Specifies the interval in seconds when the scheduler will call the event function.
#number RandomizeFactor
Specifies a randomization factor between 0 and 1 to randomize the Repeat.
#number Stop
Specifies the amount of seconds when the scheduler will be stopped.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Stops the Schedule.
Defined in:
Parameter:
#string SchedulerID
(Optional) Scheduler ID to be stopped. If nil, all pending schedules are stopped.
Set the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
Set a state or property of the Object given a Key and a Value.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that will hold the Value set by the Key.
Key
The key that is used as a reference of the value. Note that the key can be a #string, but it can also be any other type!
Value
The value to is stored in the object.
Return value:
The Value set.
Trace a function logic level 1.
Can be anywhere within the function logic.
Trace a function logic level 2.
Can be anywhere within the function logic.
Trace a function logic level 3.
Can be anywhere within the function logic.
Trace all methods in MOOSE
Set tracing for a class
Set tracing for a specific method of class
Set trace off.
Set trace on.
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default.
So tracing must be switched on manually in your mission if you are using Moose statically. When moose is loading dynamically (for moose class development), tracing is switched on by default.
Defined in:
Parameter:
#boolean TraceOnOff
Switch the tracing on or off.
Usage:
-- Switch the tracing On
BASE:TraceOnOff( true )
-- Switch the tracing Off
BASE:TraceOnOff( false )
UnSubscribe to a DCS event.
Trace a function call.
This function is private.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
Trace a function logic.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
The main event handling function...
This function captures all events generated for the class.