Module AI.AI_Cargo_Airplane
AI - Models the intelligent transportation of cargo using airplanes.
Author: FlightControl
Global(s)
Global AI_CARGO_AIRPLANE |
Brings a dynamic cargo handling capability for an AI airplane group. |
Brings a dynamic cargo handling capability for an AI airplane group.
Airplane carrier equipment can be mobilized to intelligently transport infantry and other cargo within the simulation between airbases.
The AI_CARGO_AIRPLANE module uses the Cargo.Cargo capabilities within the MOOSE framework. Cargo.Cargo must be declared within the mission to make AI_CARGO_AIRPLANE recognize the cargo. Please consult the Cargo.Cargo module for more information.
Cargo pickup.
Using the AI_CARGO_AIRPLANE.Pickup() method, you are able to direct the helicopters towards a point on the battlefield to board/load the cargo at the specific coordinate. Ensure that the landing zone is horizontally flat, and that trees cannot be found in the landing vicinity, or the helicopters won't land or will even crash!
Cargo deployment.
Using the AI_CARGO_AIRPLANE.Deploy() method, you are able to direct the helicopters towards a point on the battlefield to unboard/unload the cargo at the specific coordinate. Ensure that the landing zone is horizontally flat, and that trees cannot be found in the landing vicinity, or the helicopters won't land or will even crash!
Infantry health.
When infantry is unboarded from the APCs, the infantry is actually respawned into the battlefield. As a result, the unboarding infantry is very healthy every time it unboards. This is due to the limitation of the DCS simulator, which is not able to specify the health of new spawned units as a parameter. However, infantry that was destroyed when unboarded, won't be respawned again. Destroyed is destroyed. As a result, there is some additional strength that is gained when an unboarding action happens, but in terms of simulation balance this has marginal impact on the overall battlefield simulation. Fortunately, the firing strength of infantry is limited, and thus, respacing healthy infantry every time is not so much of an issue ...
Developer Note
Note while this class still works, it is no longer supported as the original author stopped active development of MOOSE Therefore, this class is considered to be deprecated
Type(s)
| Fields and Methods inherited from FSM_CONTROLLABLE | Description |
|---|---|
|
Gets the CONTROLLABLE object that the FSM_CONTROLLABLE governs. |
|
|
Creates a new FSM_CONTROLLABLE object. |
|
AI_CARGO_AIRPLANE:OnAfterStop(Controllable, From, Event, To) |
OnAfter Transition Handler for Event Stop. |
AI_CARGO_AIRPLANE:OnBeforeStop(Controllable, From, Event, To) |
OnBefore Transition Handler for Event Stop. |
AI_CARGO_AIRPLANE:OnEnterStopped(Controllable, From, Event, To) |
OnEnter Transition Handler for State Stopped. |
AI_CARGO_AIRPLANE:OnLeaveStopped(Controllable, From, Event, To) |
OnLeave Transition Handler for State Stopped. |
|
Sets the CONTROLLABLE object that the FSM_CONTROLLABLE governs. |
|
|
Synchronous Event Trigger for Event Stop. |
|
|
Asynchronous Event Trigger for Event Stop. |
|
AI_CARGO_AIRPLANE:_call_handler(step, trigger, params, EventName) |
| Fields and Methods inherited from FSM | Description |
|---|---|
|
Adds an End state. |
|
AI_CARGO_AIRPLANE:AddProcess(From, Event, Process, ReturnEvents) |
Set the default #FSM_PROCESS template with key ProcessName providing the ProcessClass and the process object when it is assigned to a Wrapper.Controllable by the task. |
|
Adds a score for the FSM to be achieved. |
|
AI_CARGO_AIRPLANE:AddScoreProcess(From, Event, State, ScoreText, Score) |
Adds a score for the FSM_PROCESS to be achieved. |
|
Add a new transition rule to the FSM. |
|
|
Call scheduler. |
|
|
Name of the class. |
|
|
Get current state. |
|
|
Returns the End states. |
|
|
Returns a table of the SubFSM rules defined within the FSM. |
|
|
Returns a table with the scores defined. |
|
|
Returns the start state of the FSM. |
|
|
Get current state. |
|
|
Returns a table with the Subs defined. |
|
|
Returns a table of the transition rules defined within the FSM. |
|
|
Check if FSM is in state. |
|
|
Load call backs. |
|
|
Creates a new FSM object. |
|
|
Scores. |
|
|
Sets the start state of the FSM. |
|
|
Add to map. |
|
AI_CARGO_AIRPLANE:_call_handler(step, trigger, params, EventName) |
Call handler. |
|
Create transition. |
|
|
Delayed transition. |
|
|
Event map. |
|
|
Go sub. |
|
|
Handler. |
|
|
Is end state. |
|
|
Sub maps. |
|
|
Check if can do an event. |
|
|
Check if cannot do an event. |
|
|
Current state name. |
|
|
Check if FSM is in state. |
|
|
Options. |
|
|
Subs. |
| Fields and Methods inherited from BASE | Description |
|---|---|
|
The ID number of the class. |
|
|
The name of the class. |
|
|
The name of the class concatenated with the ID number of the class. |
|
|
Clear the state of an object. |
|
AI_CARGO_AIRPLANE:CreateEventBirth(EventTime, Initiator, IniUnitName, place, subplace) |
Creation of a Birth Event. |
AI_CARGO_AIRPLANE:CreateEventCrash(EventTime, Initiator, IniObjectCategory) |
Creation of a Crash Event. |
AI_CARGO_AIRPLANE:CreateEventDead(EventTime, Initiator, IniObjectCategory) |
Creation of a Dead Event. |
AI_CARGO_AIRPLANE:CreateEventDynamicCargoLoaded(DynamicCargo) |
Creation of a S_EVENT_DYNAMIC_CARGO_LOADED event. |
AI_CARGO_AIRPLANE:CreateEventDynamicCargoRemoved(DynamicCargo) |
Creation of a S_EVENT_DYNAMIC_CARGO_REMOVED event. |
AI_CARGO_AIRPLANE:CreateEventDynamicCargoUnloaded(DynamicCargo) |
Creation of a S_EVENT_DYNAMIC_CARGO_UNLOADED event. |
|
Creation of a S_EVENT_NEW_DYNAMIC_CARGO event. |
|
AI_CARGO_AIRPLANE:CreateEventPlayerEnterAircraft(PlayerUnit) |
Creation of a |
AI_CARGO_AIRPLANE:CreateEventRemoveUnit(EventTime, Initiator) |
Creation of a Remove Unit Event. |
|
Creation of a Takeoff Event. |
|
|
Creation of a Crash Event. |
|
|
Log an exception which will be traced always. |
|
|
Returns the event dispatcher |
|
|
Remove all subscribed events |
|
|
Trace a function call. |
|
|
Trace a function call level 2. |
|
|
Trace a function call level 3. |
|
|
Get the ClassID of the class instance. |
|
|
Get the ClassName of the class instance. |
|
|
Get the ClassName + ClassID of the class instance. |
|
|
Get the Class Core.Event processing Priority. |
|
|
This is the worker method to retrieve the Parent class. |
|
|
Get a Value given a Key from the Object. |
|
|
Subscribe to a DCS Event. |
|
|
Log an information which will be traced always. |
|
|
This is the worker method to inherit from a parent class. |
|
|
This is the worker method to check if an object is an (sub)instance of a class. |
|
|
Enquires if tracing is on (for the class). |
|
|
BASE constructor. |
|
|
Occurs when an Event for an object is triggered. |
|
|
BDA. |
|
|
Occurs when a ground unit captures either an airbase or a farp. |
|
|
Occurs when any object is spawned into the mission. |
|
|
Occurs when any aircraft crashes into the ground and is completely destroyed. |
|
|
Occurs when an object is dead. |
|
|
Unknown precisely what creates this event, likely tied into newer damage model. |
|
AI_CARGO_AIRPLANE:OnEventDiscardChairAfterEjection(EventData) |
Discard chair after ejection. |
|
Occurs when a player loads a dynamic cargo object with the F8 ground crew menu into a helo. |
|
|
Occurs when a dynamic cargo crate is removed. |
|
|
Occurs when a player unloads a dynamic cargo object with the F8 ground crew menu from a helo. |
|
|
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
|
Occurs when any aircraft shuts down its engines. |
|
|
Occurs when any aircraft starts its engines. |
|
|
Occurs whenever an object is hit by a weapon. |
|
|
Occurs when any system fails on a human controlled aircraft. |
|
|
Occurs on the death of a unit. |
|
|
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
|
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up. |
|
|
Landing quality mark. |
|
|
Occurs when a new mark was added. |
|
|
Occurs when a mark text was changed. |
|
|
Occurs when a mark was removed. |
|
|
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
|
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes. |
|
|
Occurs when a player creates a dynamic cargo object from the F8 ground crew menu. |
|
|
Weapon add. |
|
|
Occurs when the pilot of an aircraft is killed. |
|
|
Occurs when a player enters a slot and takes control of an aircraft. |
|
|
Occurs when any player assumes direct control of a unit. |
|
|
Occurs when any player relieves control of a unit to the AI. |
|
|
Occurs when an aircraft connects with a tanker and begins taking on fuel. |
|
|
Occurs when an aircraft is finished taking fuel. |
|
|
Occurs when any modification to the "Score" as seen on the debrief menu would occur. |
|
|
Occurs when any unit stops firing its weapon. |
|
|
Occurs when any unit begins firing a weapon that has a high rate of fire. |
|
|
Occurs whenever any unit in a mission fires a weapon. |
|
|
Occurs when an aircraft takes off from an airbase, farp, or ship. |
|
|
Trigger zone. |
|
|
Occurs when the game thinks an object is destroyed. |
|
AI_CARGO_AIRPLANE:ScheduleOnce(Start, SchedulerFunction, ...) |
Schedule a new time event. |
AI_CARGO_AIRPLANE:ScheduleRepeat(Start, Repeat, RandomizeFactor, Stop, SchedulerFunction, ...) |
Schedule a new time event. |
|
Stops the Schedule. |
|
|
Set the Class Core.Event processing Priority. |
|
|
Set a state or property of the Object given a Key and a Value. |
|
|
Trace a function logic level 1. |
|
|
Trace a function logic level 2. |
|
|
Trace a function logic level 3. |
|
|
Trace all methods in MOOSE |
|
|
Set tracing for a class |
|
|
Set tracing for a specific method of class |
|
|
Set trace level |
|
|
Set trace off. |
|
|
Set trace on. |
|
|
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default. |
|
|
UnSubscribe to a DCS event. |
|
AI_CARGO_AIRPLANE:_F(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function call. |
|
(Internal) Serialize arguments |
|
AI_CARGO_AIRPLANE:_T(Arguments, DebugInfoCurrentParam, DebugInfoFromParam) |
Trace a function logic. |
|
The main event handling function... |
Field(s)
We are going home!
Function(s)
Deploy Trigger for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Core.Point#COORDINATE Coordinate
Coordinate where to deploy stuff.
#number Speed
Speed in km/h for travelling to the deploy base.
#number Height
Height in meters to move to the home coordinate.
Core.Zone#ZONE_AIRBASE DeployZone
The airbase zone where the cargo will be deployed.
Find a free Carrier within a range.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Airbase#AIRBASE Airbase
#number Radius
Coordinate
Return value:
NewCarrier
Creates a new AI_CARGO_AIRPLANE object.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Plane used for transportation of cargo.
Core.Set#SET_CARGO CargoSet
Cargo set to be transported.
Return value:
Deploy Handler OnAfter for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Point#COORDINATE Coordinate
Coordinate where to deploy stuff.
#number Speed
Speed in km/h for travelling to the deploy base.
#number Height
Height in meters to move to the home coordinate.
Core.Zone#ZONE_AIRBASE DeployZone
The airbase zone where the cargo will be deployed.
On after Deployed event.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Zone#ZONE DeployZone
The zone wherein the cargo is deployed.
On after Loaded event, i.e.
triggered when the cargo is inside the carrier.
Pickup Handler OnAfter for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Point#COORDINATE Coordinate
The coordinate where to pickup stuff.
#number Speed
Speed in km/h for travelling to pickup base.
#number Height
Height in meters to move to the pickup coordinate.
Core.Zone#ZONE_AIRBASE PickupZone
The airbase zone where the cargo will be picked up.
Deploy Handler OnBefore for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo plane.
#string From
#string Event
#string To
Wrapper.Airbase#AIRBASE Airbase
Destination airbase where troops are deployed.
#number Speed
Speed in km/h for travelling to deploy base.
Return value:
#boolean:
Pickup Handler OnBefore for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Wrapper.Airbase#AIRBASE Airbase
Airbase where troops are picked up.
#number Speed
in km/h for travelling to pickup base.
Return value:
#boolean:
Pickup Trigger for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Core.Point#COORDINATE Coordinate
The coordinate where to pickup stuff.
#number Speed
Speed in km/h for travelling to pickup base.
#number Height
Height in meters to move to the pickup coordinate.
Core.Zone#ZONE_AIRBASE PickupZone
The airbase zone where the cargo will be picked up.
Route the airplane from one airport or it's current position to another airbase.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Airplane group to be routed.
Wrapper.Airbase#AIRBASE Airbase
Destination airbase.
#number Speed
Speed in km/h. Default is 80% of max possible speed the group can do.
#number Height
Height in meters to move to the Airbase.
#boolean Uncontrolled
If true, spawn group in uncontrolled state.
Set the Carrier (controllable).
Also initializes events for carrier and defines the coalition.
Defined in:
AI_CARGO_AIRPLANE
Parameter:
Wrapper.Group#GROUP Airplane
Transport plane.
Return value:
self
Deploy Asynchronous Trigger for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
#number Delay
Delay in seconds.
Core.Point#COORDINATE Coordinate
Coordinate where to deploy stuff.
#number Speed
Speed in km/h for travelling to the deploy base.
#number Height
Height in meters to move to the home coordinate.
Core.Zone#ZONE_AIRBASE DeployZone
The airbase zone where the cargo will be deployed.
Pickup Asynchronous Trigger for AI_CARGO_AIRPLANE
Defined in:
AI_CARGO_AIRPLANE
Parameters:
#number Delay
Delay in seconds.
Core.Point#COORDINATE Coordinate
The coordinate where to pickup stuff.
#number Speed
Speed in km/h for travelling to pickup base.
#number Height
Height in meters to move to the pickup coordinate.
Core.Zone#ZONE_AIRBASE PickupZone
The airbase zone where the cargo will be picked up.
On after Depoly event.
Routes plane to the airbase where the troops are deployed.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Point#COORDINATE Coordinate
Coordinate where to deploy stuff.
#number Speed
Speed in km/h for travelling to the deploy base.
#number Height
Height in meters to move to the home coordinate.
Core.Zone#ZONE_AIRBASE DeployZone
The airbase zone where the cargo will be deployed.
On after Home event.
Aircraft will be routed to their home base.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
The cargo plane.
From
From state.
Event
Event.
To
To State.
Core.Point#COORDINATE Coordinate
Home place (not used).
#number Speed
Speed in km/h to fly to the home airbase (zone). Default is 80% of max possible speed the unit can go.
#number Height
Height in meters to move to the home coordinate.
Core.Zone#ZONE_AIRBASE HomeZone
The home airbase (zone) where the plane should return to.
On after "Landed" event.
Called on engine shutdown and initiates the pickup mission or unloading event.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
From
Event
To
On after "Pickup" event.
Routes transport to pickup airbase.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Point#COORDINATE Coordinate
The coordinate where to pickup stuff.
#number Speed
Speed in km/h for travelling to pickup base.
#number Height
Height in meters to move to the pickup coordinate.
Core.Zone#ZONE_AIRBASE PickupZone
The airbase zone where the cargo will be picked up.
On after Unload event.
Cargo is beeing unloaded, i.e. the unboarding process is started.
Defined in:
AI_CARGO_AIRPLANE
Parameters:
Wrapper.Group#GROUP Airplane
Cargo transport plane.
#string From
From state.
#string Event
Event.
#string To
To state.
Core.Zone#ZONE_AIRBASE DeployZone
The airbase zone where the cargo will be deployed.
Field(s)
We are going home!
Function(s)
Gets the CONTROLLABLE object that the FSM_CONTROLLABLE governs.
Creates a new FSM_CONTROLLABLE object.
Defined in:
Parameters:
#table FSMT
Finite State Machine Table
Wrapper.Controllable#CONTROLLABLE Controllable
(optional) The CONTROLLABLE object that the FSM_CONTROLLABLE governs.
Return value:
OnAfter Transition Handler for Event Stop.
Defined in:
Parameters:
Wrapper.Controllable#CONTROLLABLE Controllable
The Controllable Object managed by the FSM.
#string From
The From State string.
#string Event
The Event string.
#string To
The To State string.
OnBefore Transition Handler for Event Stop.
Defined in:
Parameters:
Wrapper.Controllable#CONTROLLABLE Controllable
The Controllable Object managed by the FSM.
#string From
The From State string.
#string Event
The Event string.
#string To
The To State string.
Return value:
#boolean:
Return false to cancel Transition.
OnEnter Transition Handler for State Stopped.
Defined in:
Parameters:
Wrapper.Controllable#CONTROLLABLE Controllable
The Controllable Object managed by the FSM.
#string From
The From State string.
#string Event
The Event string.
#string To
The To State string.
OnLeave Transition Handler for State Stopped.
Defined in:
Parameters:
Wrapper.Controllable#CONTROLLABLE Controllable
The Controllable Object managed by the FSM.
#string From
The From State string.
#string Event
The Event string.
#string To
The To State string.
Return value:
#boolean:
Return false to cancel Transition.
Sets the CONTROLLABLE object that the FSM_CONTROLLABLE governs.
Synchronous Event Trigger for Event Stop.
Defined in:
Asynchronous Event Trigger for Event Stop.
Field(s)
We are going home!
Function(s)
Adds an End state.
Set the default #FSM_PROCESS template with key ProcessName providing the ProcessClass and the process object when it is assigned to a Wrapper.Controllable by the task.
Defined in:
Parameters:
#table From
Can contain a string indicating the From state or a table of strings containing multiple From states.
#string Event
The Event name.
Core.Fsm#FSM_PROCESS Process
An sub-process FSM.
#table ReturnEvents
A table indicating for which returned events of the SubFSM which Event must be triggered in the FSM.
Return value:
The SubFSM.
Adds a score for the FSM to be achieved.
Defined in:
Parameters:
#string State
is the state of the process when the score needs to be given. (See the relevant state descriptions of the process).
#string ScoreText
is a text describing the score that is given according the status.
#number Score
is a number providing the score of the status.
Return value:
#FSM:
self
Adds a score for the FSM_PROCESS to be achieved.
Defined in:
Parameters:
#string From
is the From State of the main process.
#string Event
is the Event of the main process.
#string State
is the state of the process when the score needs to be given. (See the relevant state descriptions of the process).
#string ScoreText
is a text describing the score that is given according the status.
#number Score
is a number providing the score of the status.
Return value:
#FSM:
self
Add a new transition rule to the FSM.
A transition rule defines when and if the FSM can transition from a state towards another state upon a triggered event.
Defined in:
Parameters:
#table From
Can contain a string indicating the From state or a table of strings containing multiple From states.
#string Event
The Event name.
#string To
The To state.
Get current state.
Returns the End states.
Returns a table of the SubFSM rules defined within the FSM.
Returns a table with the scores defined.
Returns the start state of the FSM.
Get current state.
Returns a table with the Subs defined.
Returns a table of the transition rules defined within the FSM.
Check if FSM is in state.
Defined in:
Parameter:
#string State
State name.
Return value:
#boolean:
If true, FSM is in this state.
Load call backs.
Sets the start state of the FSM.
Add to map.
Call handler.
Defined in:
Parameters:
#string step
Step "onafter", "onbefore", "onenter", "onleave".
#string trigger
Trigger.
#table params
Parameters.
#string EventName
Event name.
Return value:
Value.
Create transition.
Defined in:
Parameter:
#string EventName
Event name.
Return value:
#function:
Function.
Delayed transition.
Defined in:
Parameter:
#string EventName
Event name.
Return value:
#function:
Function.
Event map.
Go sub.
Defined in:
Parameters:
#string ParentFrom
Parent from state.
#string ParentEvent
Parent event name.
Return value:
#table:
Subs.
Handler.
Is end state.
Defined in:
Parameter:
#string Current
Current state name.
Return values:
#table:
FSM parent.
#string:
Event name.
Sub maps.
Check if can do an event.
Defined in:
Parameter:
#string e
Event name.
Return values:
#boolean:
If true, FSM can do the event.
#string:
To state.
Check if cannot do an event.
Defined in:
Parameter:
#string e
Event name.
Return value:
#boolean:
If true, FSM cannot do the event.
Check if FSM is in state.
Defined in:
Parameters:
#string State
State name.
state
Return value:
#boolean:
If true, FSM is in this state.
Field(s)
We are going home!
Function(s)
Clear the state of an object.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
StateName
The key that is should be cleared.
Creation of a Birth Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
#string IniUnitName
The initiating unit name.
place
subplace
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a Dead Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
IniObjectCategory
Creation of a S_EVENT_DYNAMIC_CARGO_LOADED event.
Creation of a S_EVENT_DYNAMIC_CARGO_REMOVED event.
Creation of a S_EVENT_DYNAMIC_CARGO_UNLOADED event.
Creation of a S_EVENT_NEW_DYNAMIC_CARGO event.
Creation of a S_EVENT_PLAYER_ENTER_AIRCRAFT event.
Creation of a Remove Unit Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Takeoff Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Creation of a Crash Event.
Defined in:
Parameters:
DCS#Time EventTime
The time stamp of the event.
DCS#Object Initiator
The initiating object of the event.
Log an exception which will be traced always.
Can be anywhere within the function logic.
Returns the event dispatcher
Remove all subscribed events
Trace a function call.
Must be at the beginning of the function logic.
Trace a function call level 2.
Must be at the beginning of the function logic.
Trace a function call level 3.
Must be at the beginning of the function logic.
Get the ClassID of the class instance.
Get the ClassName of the class instance.
Get the ClassName + ClassID of the class instance.
The ClassName + ClassID is formatted as '%s#%09d'.
Get the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
This is the worker method to retrieve the Parent class.
Note that the Parent class must be passed to call the parent class method.
self:GetParent(self):ParentMethod()
Get a Value given a Key from the Object.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that holds the Value set by the Key.
Key
The key that is used to retrieve the value. Note that the key can be a #string, but it can also be any other type!
Return value:
The Value retrieved or nil if the Key was not found and thus the Value could not be retrieved.
Subscribe to a DCS Event.
Defined in:
Parameters:
Core.Event#EVENTS EventID
Event ID.
#function EventFunction
(optional) The function to be called when the event occurs for the unit.
Return value:
Log an information which will be traced always.
Can be anywhere within the function logic.
This is the worker method to inherit from a parent class.
Defined in:
Parameters:
Child
is the Child class that inherits.
#BASE Parent
is the Parent class that the Child inherits from.
Return value:
Child
This is the worker method to check if an object is an (sub)instance of a class.
Examples:
ZONE:New( 'some zone' ):IsInstanceOf( ZONE ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'ZONE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'zone' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'BASE' ) will return true
ZONE:New( 'some zone' ):IsInstanceOf( 'GROUP' ) will return false
Defined in:
Parameter:
ClassName
is the name of the class or the class itself to run the check against
Return value:
#boolean:
Enquires if tracing is on (for the class).
BASE constructor.
This is an example how to use the BASE:New() constructor in a new class definition when inheriting from BASE.
function EVENT:New()
local self = BASE:Inherit( self, BASE:New() ) -- #EVENT
return self
end
Occurs when an Event for an object is triggered.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that triggered the event.
Occurs when a ground unit captures either an airbase or a farp.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that captured the base place: The airbase that was captured, can be a FARP or Airbase. When calling place:getCoalition() the faction will already be the new owning faction.
Occurs when any object is spawned into the mission.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was spawned
Occurs when any aircraft crashes into the ground and is completely destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that has crashed
Occurs when an object is dead.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is dead.
Unknown precisely what creates this event, likely tied into newer damage model.
Will update this page when new information become available.
- initiator: The unit that had the failure.
Discard chair after ejection.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a player loads a dynamic cargo object with the F8 ground crew menu into a helo.
* NOTE * this is a workarounf for DCS not creating these events as of Aug 2024.
Occurs when a dynamic cargo crate is removed.
* NOTE * this is a workarounf for DCS not creating these events as of Aug 2024.
Occurs when a player unloads a dynamic cargo object with the F8 ground crew menu from a helo.
* NOTE * this is a workarounf for DCS not creating these events as of Aug 2024.
Occurs when a pilot ejects from an aircraft Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has ejected
Occurs when any aircraft shuts down its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is stopping its engines.
Occurs when any aircraft starts its engines.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is starting its engines.
Occurs whenever an object is hit by a weapon.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit object the fired the weapon weapon: Weapon object that hit the target target: The Object that was hit.
Occurs when any system fails on a human controlled aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that had the failure
Occurs on the death of a unit.
Contains more and different information. Similar to unit_lost it will occur for aircraft before the aircraft crash event occurs. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that killed the target
- target: Target Object
- weapon: Weapon Object
Occurs when an aircraft lands at an airbase, farp or ship Have a look at the class Core.Event#EVENT as these are just the prototypes.
initiator : The unit that has landed place: Object that the unit landed on. Can be an Airbase Object, FARP, or Ships
Occurs shortly after the landing animation of an ejected pilot touching the ground and standing up.
Event does not occur if the pilot lands in the water and sub combs to Davey Jones Locker. Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: Static object representing the ejected pilot. Place : Aircraft that the pilot ejected from.
- place: may not return as a valid object if the aircraft has crashed into the ground and no longer exists.
- subplace: is always 0 for unknown reasons.
Occurs when a new mark was added.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark text was changed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mark was removed.
Have a look at the class Core.Event#EVENT as these are just the prototypes. MarkID: ID of the mark.
Occurs when a mission ends Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a mission starts Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when a player creates a dynamic cargo object from the F8 ground crew menu.
* NOTE * this is a workarounf for DCS not creating these events as of Aug 2024.
Weapon add.
Fires when entering a mission per pylon with the name of the weapon (double pylons not counted, infinite wep reload not counted. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when the pilot of an aircraft is killed.
Can occur either if the player is alive and crashes or if a weapon kills the pilot without completely destroying the plane. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the pilot has died in.
Occurs when a player enters a slot and takes control of an aircraft.
Have a look at the class Core.Event#EVENT as these are just the prototypes. NOTE: This is a workaround of a long standing DCS bug with the PLAYER_ENTER_UNIT event. initiator : The unit that is being taken control of.
Occurs when any player assumes direct control of a unit.
Note - not Mulitplayer safe. Use PlayerEnterAircraft. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is being taken control of.
Occurs when any player relieves control of a unit to the AI.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that the player left.
Occurs when an aircraft connects with a tanker and begins taking on fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is receiving fuel.
Occurs when an aircraft is finished taking fuel.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was receiving fuel.
Occurs when any modification to the "Score" as seen on the debrief menu would occur.
There is no information on what values the score was changed to. Event is likely similar to player_comment in this regard. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when any unit stops firing its weapon.
Event will always correspond with a shooting start event. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that was doing the shooting.
Occurs when any unit begins firing a weapon that has a high rate of fire.
Most common with aircraft cannons (GAU-8), autocannons, and machine guns. Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that is doing the shooting. target: The unit that is being targeted.
Occurs whenever any unit in a mission fires a weapon.
But not any machine gun or autocannon based weapon, those are handled by EVENT.ShootingStart. Have a look at the class Core.Event#EVENT as these are just the prototypes.
Occurs when an aircraft takes off from an airbase, farp, or ship.
Have a look at the class Core.Event#EVENT as these are just the prototypes. initiator : The unit that tookoff place: Object from where the AI took-off from. Can be an Airbase Object, FARP, or Ships
Occurs when the game thinks an object is destroyed.
Have a look at the class Core.Event#EVENT as these are just the prototypes.
- initiator: The unit that is was destroyed.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Schedule a new time event.
Note that the schedule will only take place if the scheduler is started. Even for a single schedule event, the scheduler needs to be started also.
Defined in:
Parameters:
#number Start
Specifies the amount of seconds that will be waited before the scheduling is started, and the event function is called.
#number Repeat
Specifies the interval in seconds when the scheduler will call the event function.
#number RandomizeFactor
Specifies a randomization factor between 0 and 1 to randomize the Repeat.
#number Stop
Specifies the amount of seconds when the scheduler will be stopped.
#function SchedulerFunction
The event function to be called when a timer event occurs. The event function needs to accept the parameters specified in SchedulerArguments.
#table ...
Optional arguments that can be given as part of scheduler. The arguments need to be given as a table { param1, param 2, ... }.
Return value:
#string:
The Schedule ID of the planned schedule.
Stops the Schedule.
Defined in:
Parameter:
#string SchedulerID
(Optional) Scheduler ID to be stopped. If nil, all pending schedules are stopped.
Set the Class Core.Event processing Priority.
The Event processing Priority is a number from 1 to 10, reflecting the order of the classes subscribed to the Event to be processed.
Set a state or property of the Object given a Key and a Value.
Note that if the Object is destroyed, set to nil, or garbage collected, then the Values and Keys will also be gone.
Defined in:
Parameters:
Object
The object that will hold the Value set by the Key.
Key
The key that is used as a reference of the value. Note that the key can be a #string, but it can also be any other type!
Value
The value to is stored in the object.
Return value:
The Value set.
Trace a function logic level 1.
Can be anywhere within the function logic.
Trace a function logic level 2.
Can be anywhere within the function logic.
Trace a function logic level 3.
Can be anywhere within the function logic.
Trace all methods in MOOSE
Set tracing for a class
Set tracing for a specific method of class
Set trace level
Set trace off.
Set trace on.
Set trace on or off Note that when trace is off, no BASE.Debug statement is performed, increasing performance! When Moose is loaded statically, (as one file), tracing is switched off by default.
So tracing must be switched on manually in your mission if you are using Moose statically. When moose is loading dynamically (for moose class development), tracing is switched on by default.
Defined in:
Parameter:
#boolean TraceOnOff
Switch the tracing on or off.
Usage:
-- Switch the tracing On
BASE:TraceOnOff( true )
-- Switch the tracing Off
BASE:TraceOnOff( false )
UnSubscribe to a DCS event.
Trace a function call.
This function is private.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
(Internal) Serialize arguments
Trace a function logic.
Defined in:
Parameters:
Arguments
A #table or any field.
DebugInfoCurrentParam
DebugInfoFromParam
The main event handling function...
This function captures all events generated for the class.